Learn how to solve a 3x3 Rubik's Cube with a completely free walkthrough guide from KewbzUK. Simply follow the steps below to solve your cube.This guide has been written with beginners in mind so any advanced cubers please bear with us, we will make this as fool proof as possible.

Please Note: All images used in this guide are generic pictures of 3x3 Speed Cubes and may not be genuine Rubik's brand cubes. All images are for illustrational and educational purposes only.

# Notation

When you see a letter by itself (**U**) you will perform the move in a clockwise rotation. However, when the letter is followed by an apostrophe (**U'**) you will perform the move in an anti-clockwise rotation. Which way is clockwise on the Back Layer you ask? Well imagine you were facing that layer, perform the move from this angle.

# step 1 - the cross

We start by completing a cross on a chosen face, for this example I have chosen the White side. On your cube locate the white centre piece.

For each step we will take a look at different cases you may come across. The first step is very intuitive and there are not many cases that we can show you. You must not only complete the white cross on top but make sure the corresponding edge also fits into place.

### 3x3 Solution Guide - Step 1 (Video)

# Step 2 - The White corners

Right, with the top cross solved we must now solve the whole top layer ( * make sure you hold the white cross on the top for the remainder of this step *). Locate any white corner piece and hold it beneath were it needs to go (for the example below we have used the

**WHITE**,

**BLUE**,

**RED**corner piece (note we have placed it beneath the WHITE, BLUE and RED centre pieces).

Follow the cases below to complete the whole top layer.

### 3x3 Solution Guide - Step 2 (Video)

# Step 3 - The second layer

You should now have the whole top layer completed, to proceed we must complete the middle layer. There are only 4 edge pieces which must be solved in this step (if your lucky some of them may already be in the correct place).

First we should turn our cube over so that the Yellow centred piece is on top and the White face that we just completed is on the bottom. Let's follow the cases below to complete this layer.

### 3x3 Solution Guide - Step 3 (Video)

# Step 4A - The yellow Cross

In this step we will create a yellow cross on the top layer (like we did with the white cross in step 1, also making sure we match up the edge pieces). Once step 3 has been completed you will have one of 4 cases, the 4th case will be a completed yellow cross so we will show you the other 3 (below).

Depending on whichever case you have - hold the cube as shown and perform the algorithm to create a yellow cross on the top layer.

# step 4b - finishing the cross

Hold your puzzle as shown so that the yellow cross is on the top layer and the front edge piece is in the correct position along with the right hand edge piece also being in the correct position (as shown in the image). This will leave the left hand edge piece and back edge piece to be swapped.

Note: If you cannot make the front and right edge pieces match then simply perform the algorithm from any face, then repeat Step 4b

Perform the algorithm [ __ F U F' U F U2 F' U]__ shown above the image to swap the (left & back) edge pieces.

**F U F' U F U2 F' U**

### 3x3 Solution Guide - Step 4 (Video)

# Step 5 - permuting the corners

In this step we will move all of the corners to their correct place (not necessarily in the correct rotation however). **If all corners of your top layer are in the correct place then move on to step 6.**

- Locate 1 corner that is already in the correct place (making sure not to twist any layers of your cube).
- Hold the corner piece in the front right hand corner as shown in the images below.

*In all 3 images below the corner piece in the FRONT, RIGHT corner on the top face is in the correct place (just rotated differently). The other 3 corner pieces are in the incorrect place.*

Perform the algorithm: ( **U R U' L' U R' U' L**) with the solved corner in the front right corner of the top face. This algorithm will cycle the other 3 corners in an anti-clockwise rotation.

This will leave you with a nearly solved Rubik's Cube. All corners on the top layer will be in their correct places but just out of rotation (not all yellows are facing upwards).

Let's move on to step 6 and fully solve our Rubik's Cube.

### 3x3 Solution Guide - Step 5 (Video)

# step 6 - the final step

In this final step we will rotate the last few corners and solve our Rubik's Cube completely. Hold your cube in any rotation and make sure the yellow cross is on the top layer. Let's follow the bullet points below:

1. Hold your cube so that any incorrectly rotated corner piece is in the **FRONT**, **RIGHT **hand corner of the top layer.

(You might have 4, 3 or 2 incorrectly rotated corners).

2. Perform the algorithm:

**R' D' R D **

(Repeat this algorithm until the yellow is on the top face).

Note: Your cube might look scrambled at this point.

3. Simply rotate the top layer until the next corner to rotate is in the **FRONT**, **RIGHT** hand corner of the top layer and repeat the algorithm again.

**R' D' R D**

Note: Remember to repeat this algorithm until the corner piece is in the correct rotation.

4. Simply keep repeating these steps until your cube is solved. Don't forget that you may have to perform the **R'D' R D** algorithm more than once on one corner.

### 3x3 Solution Guide - Step 6 (Video)

8 comments

satish kumar

Hi there,

It is a wonderful site having explained clearly

by nice illustrations and clearly explained for 3×3 Cube.Thanks for the nice explanations.

satish kumar

Hi there,

It is a wonderful site having explained clearly

by nice illustrations and clearly explained for 3×3 Cube.Thanks for the nice explanations.

Cuc

Good method! For personal reasons, I’d recommend some minor alterations. All the steps are unchanged, but it would be helpful to add these alternatives to the indicated cases. (Note that some cases stay unaltered.) In my proposal, the algorithms are shorter or more logical :-).

For STEP 1:

- case 3: (R L) U2 (R’ L’)

For STEP 2:

- case 3: R2 D’ R2 D R2

- case 4: (R F’ R’ F)2

- case 5: (F’ R F R’)2

For STEP 3:

NOTE. In both cases, I take the right face = R, as in the shown case 2.

- case 1: U’ (F’ U’ F) U (R U R’)

- case 2: U (R U R’) U’ (F’ U’ F)

- case 3: (R U’ R) U2 (F R2 F’) U2 R2

For STEP 4B:

- R’ U’ R U’ R’ U2 R U’

For STEP 5:

Replace the used formula by the following equivalent algorithm. It is two turns longer, but the added R turns make the algorithm conformable to using the commutator (U R U’ R’) and its reverse, to prevent turn mistakes.

- (U R U’ R’) L’ (R U R’ U’) L

For STEP 6:

instead use

- (R F’ R’ F)2 for twisting the URF corner clockwise and

- (F’ R F R’)2 for twisting the URF corner counterclockwise.

These proposals are marginal changes to your system, but may turn out to be quicker and less error prone.

Happy Cubing!

Cuc

@M Fazlur Rashid Mridha.

Assuming you didn’t make a mistake, this could happen if your cube is indeed unsolvable. For instance, if starting from a solved cube one of the corners is manually twisted, the resulting situation can not be solved by performing moves. In order to fix it you need to twist that corner back in the same way, manually.

But to know whether you are in that case, it helps to know that (R’ D’ R D) has order 6, that is, if repeated 6 times it doesn’t do anything.

So, instead, try (R’ D’ R D)2 or (R’ D’ R D)4 on a corner to solve it. Then take another corner and perform the remaining 4 repetitions (in the first case) or the remaining 2 repetitions (in the second case). If you reach a situation where only

onecorner is twisted, twist it manually (this is often easier than disassembling the cube).M Fazlur Rashid Mridha

I could not make the step 6 successfully. The top yellow face become ok, but the other two layers get scrambled.

Kieran Finles

Brilliant Guide solved it straight away first time!

Thaks

George

Thisihaventtried but the 2×2 worksi doitall day just cant seem to memorize it

Owen

It won’t work no matter how hard I try! This is already my… 4th try? I don’t know what I’m missing! Please help meeeeeeeeeeeeeeee…